Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

IAD2400 capabilities

Hello.

I have some questions about the IAD2400 series:

1) Can it act as a Voice gateway by connecting 16 analog phones (using the 16 ports FXS) to an IP network, running VoIP, using the 10BaseT interface ? In other words - can i run VoIP over the Ethernet interface of the device ?

2) The same question as question-1 but using the serial port instead of the 10BaseT to connect to the VoIP network.

3) Does IAD2400 support multicasting: IGMP, PIM, etc ?

Thank you,

Boaz.

1 REPLY
Cisco Employee

Re: IAD2400 capabilities

answers:

1) yes, but the caveat is with the type of signaling it is capable of:

Q. Which call control protocols are supported by the Cisco IAD2420?

A. Cisco IAD2420 supports MGCP 0.1, MGCP 1.0, and SGCP 1.5.

Q. Does the Cisco IAD2420 support H.323 or SIP?

A. No. The current generation of IAD2420 products does not support H.323 and SIP.

Yes, voip will work onj the ethernet interface.

2)serial ports will work as well as long as you are using one of the signaling protocols described above.

3) Yes

290
Views
0
Helpful
1
Replies