Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

ICS 7740 PRI Registration

I have an ICS 7750 set up with 2 PRI gateways using MGCP. When we look at the gateways themselves they show as being registered. When looking in CCM admin it shows the IP address of the gateway but registration is showing as unknown. I have checked the settings and the hostnames. Everything is set right. Is there a reason they wont show as registered, or anything that can be done to get them to register? Pleas help.

  • Other Collaboration Voice and Video Subjects
2 REPLIES
Cisco Employee

Re: ICS 7740 PRI Registration

Can you turn on debug mgcp packet and do a shut/no shut on the controller? That will show the message exchange during registration and might reveal the source of the problem. Your running config would also be helpful.

Shelly

New Member

Re: ICS 7740 PRI Registration

Jeremy,

Did you configure the proper dial-peer with application MGCPAPP pointing to 1/0:23? I have seen your exact problem many times when i forgot to do this.

111
Views
0
Helpful
2
Replies
This widget could not be displayed.