Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

ICS7750 and AC

Is the Attendant Console compatible with the ICS7750 running CCM ver. 3.1.2c? I can't get it to work. I get the standard call control error.

2 REPLIES
New Member

Re: ICS7750 and AC

Yes Attendant console will work with ICS 7750 running Version 3.1.2c

with Following Caveats...so I suggest upgrading Call Manageron SPE to at least 3.1.3a

AC 1.1(1) has now been validated with 3.1(2c). The following

caveat applies:

AC functionality changes between 3.1(2c) & 3.1(3a) call managers:

-----------------------------------------------------------------

In 3.1(3a), few more TCD service parameters are added. The most important are

"KeepOriginalCalledPartyIfForwarded" and "ResetOriginalCalled". In AC, these

values are "TRUE" by default. In 3.1(2c) these values will be "TRUE" and can

not be changed. But in 3.1(3a) they can be changed through CM admin interface.

Functionality changes between Web Attendant & AC in 3.1(2c) call manager:

-------------------------------------------------------------------------

For Web Attendant the values of "KeepOriginalCalledPartyIfForwarded" and

"ResetOriginalCalled" are "TRUE" and "FALSE". The values for AC are

"TRUE" and "TRUE".

TroubleShooting:

----------------

1. After replacing the web attendant with AC, the redirected calls from the pilot

point are going to agent mailbox instead of pilot mailbox.

In 3.1(2c), The value of "ResetOriginalCalled" can not be changed. The work around is as follows.

Problem:

Let say that there is a pilot point 5503 and 2001 is the hunt group

member. When a call comes to 5503 and the call will be redirected to 2001 and it goes

to VM if the call is not answered. The caller would hear 2001 greeting.

The requirement is the caller should hear 5503 greeting.

Solution:

Change the DN of the pilot point to another DN say 5504. Create a dummy phone with

the DN 5503 and forward all the calls to 5504. Now when someone calls 5503,

the call will be forwarded to 5504. Then the call will redirected to 2001 and it

goes to the VM if the call is not answered. Now, the caller would hear 5503 greeting.

-Amisha

Cisco Systems

New Member

Re: ICS7750 and AC

Other than that AC works fine CM 3.1.2 (c)

Make sure you have following configured.

Here is what you need to do.

1) Get the new Attendant Console Software

2) Run the self-extracting exe on all CallManager boxes to replace the

existing TCD server. The new service is also called Cisco Telephony Call

Dispatcher.

3) Download the new Attendant Console client plugin from the CCM plugin page.

(It is still called WebAttendant on the plugins page).

4) From the user admin pages, Create a user 'ac' with password '12345' and associate

all pilot points and agent phones (phones controlled by attendant console) with this user.

-Amisha

Cisco Systems

96
Views
0
Helpful
2
Replies
CreatePlease login to create content