Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

ICS7750 dsp timeout

I enabled alerts of system events and i get 1 or 2 of these a day. Can anyone translate this?

receive date = 2003/01/23

receive time = 16:29:31.520

sent date = Jan 23

sent time = 16:27:54:

facility = local7

severity = error

from = 192.168.10.135 ( 3660 h.323 gateway)

cisco facility = VTSP

cisco subFacility =

cisco severity = error

cisco mnemonic = DSP_TIMEOUT

body = DSP timeout on event 0x43: DSP ID=0x4: DSP Disc (call mode=0)

DSP Timeout Error

1 REPLY

Re: ICS7750 dsp timeout

Hi,

It looks like it's a 3660 giving this error. I'm not that familiar with ICS yet but am familiar with the NM-HDV module and there was a bug involving DSP timeouts that was fixed in 12.2.(6a) code. i'd recommend going to latest 12.2 release on 3600 if you can. 12.2(6a) has a software advisory against it. 12.2.13 mainline is current release.

The workaround for DSP timeouts is to reset the router, then the DSPs will work for a few days, a few weeks, etc (varies) then the timeout errors will show up.

Helpful URLs:

http://www.cisco.com/en/US/products/hw/univgate/ps501/products_tech_note09186a00800a9402.shtml

http://www.cisco.com/en/US/tech/tk652/tk653/technologies_tech_note09186a00800e66b1.shtml

HTH, Erick

87
Views
0
Helpful
1
Replies