I'm with a CUCM 6.0 and a GW that I'm using to go through a private VoIP network (called RIG network). The GW is registered on a central GK in H323 and my GW is configured on the CUCM as a H323 gateway.
From my IP phones (behind the CUCM), I'm calling a telephone on the RIG network the remote phone is ringing but the call is impossible to start and after 10 seconds the call stop ????
Please find my GW debug in attached file.
Do not hesitate bto ask more specification about the architecture.
You may also need to increase the "Media Exchange Timer" timer and "Media Exchange Interface Capability Timer".
Media Exchange Timer is the timer for two way audio media path establishment including cap exchange, MSD exchange and logical channel establishment. If two-way audio path is not established when Media Exchange Timer pops, the call will be terminated.
SIP traces provide key information in troubleshooting SIP Trunks, SIP
endpoints and other SIP related issues. Even though these traces are in
clear text, these texts can be gibberish unless you understand fully
what they mean. This document attempts to br...
Please find the attached HTML document, download and open it on your PC.
This provides an easy to use form where you simply answer a few
questions and it will render the proper jabber-config.xml file for you
to copy/paste. There is built in logic to verif...
CUCM Database Replication is an area in which Cisco customers and
partners have asked for more in-depth training in being able to properly
assess a replication problem and potentially resolve an issue without
involving TAC. This document discusses the bas...