Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

In Linux-based UCM5.X /6.x, any command could verify DVD-ROM working ?

Hello all,

I gonna replace DVD-ROM on UCM5.X server.

Is any "show" "list" etc command that could be run to verify if replacment DVD-ROM is working not?

Or do you have other way to check ?

Thanks,

Ethan

2 REPLIES
Green

Re: In Linux-based UCM5.X /6.x, any command could verify DVD-ROM

try show tech system

or try to burn a firmware upgrade use os and select local dvd as source instead of ftp/sftp that may be the best way to test it.

New Member

Re: In Linux-based UCM5.X /6.x, any command could verify DVD-ROM

thanks for your reply,GONZALO.

From" show tech system", I could see information below regarding DVDROM.

(I haven't replace the DVDROM yet)

-----------------------------------------

cdrom 32896 0 [ide-cd]

......

class: CDROM

bus: IDE

detached: 0

device: hda

driver: ignore

desc: "HL-DT-STDVD-ROM GDR-D10N"

------------------------------------------

My question is:

1. Do you see anything suspected? Is this DVD really defective?

2. If I will test it with " firmware upgrade use os" DVD, do you mean that I need to click " upgrade ..." through UCM admin webpage? any detailed steps?

Thanks again,

Ethan

127
Views
0
Helpful
2
Replies
CreatePlease login to create content