Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Inbound Caller-ID not displayed

I am having a inbound caller-id problem.

I am CMS 4.2 A 2621 with FXO and FXS and I am using MGCP on the server. I even mad a basic route plan to make things simple.

When I use a IP or a POTS phone to call out, I transmit my caller-id of the FXO to the called party. Any incomming call on the FXO displays "Unknown number" on the ip phones and "incomming call" on the POTS.

I have read through the config guides and it looks like it is set up right but there is soemthing missing somewhere. Any help would be greatly appreciated.

1 REPLY
Silver

Re: Inbound Caller-ID not displayed

Caller ID is not supported with FXO ports when configured for MGCP. Instead, configure the gateway in H.323 mode.

Please check this link for more info.

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a008009428e.shtml

Regards,

Anup

141
Views
0
Helpful
1
Replies