Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Inbound dial-peer matching for incoming POTS call

Hello,

I have a two dial-peers:

dial-peer voice 101 pots

destination-pattern 80679463149

port 0/1/0

!

dial-peer voice 1011 pots

incoming called-number .

port 0/1/0

To port 0/1/0 incoming call arrives with no calling number. But as inbound dial-peer the first dial-peer is selected!

But in accordance with http://www.cisco.com/en/US/tech/tk652/tk90/technologies_tech_note09186a008010fed1.shtml#topic6

the second dial-peer must be matched!

Please, help to understand the problem. Thanks!

1 REPLY
Green

Re: Inbound dial-peer matching for incoming POTS call

Please upload:

debug voice ccapi inout

and debug voice dialpeer

So we can see what is going

136
Views
0
Helpful
1
Replies
CreatePlease to create content