inbound on H.323

[dmainzer]

I have several fxo-loop-start channels on a T1 that I have confiugred as separate DS0 groups. I need to configure incoming calls on these groups to go to specific DNs. I have tried to set a destination pattern on the voip dial peer, but with no success. This is an H.323 gateway. Can someone help, please?

Thanks!

[litrenta]

You should use a connection plar for the voice port corresponding to each DSO

voice-port x/y:z x=slot y=port z=ds0 group number

connection plar xxxx xxxx=DN you want the call to go to

then configure voip peer with destination pattern that matches plar connection number.

On inbound seizure plar number is considered called party number and matching takes place on that.

Regards

Sam