Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Incoming calls

New to call manager. We have an existing ip telephony setup that allows outgoing calls through a pbx. We are getting rid of the pbx and have a pri t1 with did's. The pri comes into a 3640 gateway which is connected to the call manager which is on a ics7750. which has an mrp. What do i need to do to allow incoming calls through the pri on the gateway and on the mrp and the call manager. any tips and/or links would be greatly apppreciated


Re: Incoming calls

Often times complex configuration issues are best addressed in an interactive session with one of our trained technical assistance engineers. While other forum users may be able to help, it’s often difficult to do so for this type of issue.

To utilize the resources at our Technical Assistance Center, please visit and to open a case with one of our TAC engineers, visit

If anyone else in the forum has some advice, please reply to this thread.

Thank you for posting.

New Member

Re: Incoming calls


Did you fixed the config. If not let me know, we are able to fix it.