when i try to insert users into bulk administration tool it shows an error reading: data in record number 1 does not match the corresponding sample file/number of lines and speed dials in phone template chosen. my question is... has anyone encountered this error and is thier something i'm missing?
Yes, you just have the format of the file wrong. Make sure there is no header row, the first row should be the first user. Also make sure you have all of the fields in the right place, I often have to add commas to the end of the line, because even though there is no data in it, the field must be defined.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...