I have been trying to insert User Device profiles using the BAT utility. When I select the Insert User Device Profiles Specific Details, select the file, and run the job it fails. However when I select the "Insert User Device Profiles All Details" the spreadsheet I chose is not uploaded but all new profiles are created and added. I am very confused because I am including all the details that are oulined as required on the "specific details" file I am trying to insert and it fails every time with a "device name" error but when I select the "all devices" the same uploaded file works fine?? Any advice/feedback would be very much appreciated.
I just spent some time browsing the numerous Bugs related to BAT in the CUCM 5.1(x) versions. There are well over 250 Bugs :( I'm guessing that you may be hitting this one that does not identify * Mandatory Fields properly (like Device Name);
CSCsj74131 Bug Details
BAT.xlt UDP work sheet need changes.
BAT.xlt UDP work sheet need changes
Steps to Reproduce:
1. Download BAT.xlt.
2. Open it and goto UDP work sheet.
3. You could find "Device Profile name " as "optional"
It should be mandatory.
Also create file format for UDP missing "service".
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...