Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Integration analog modems into IP telephony

We are searching for any good integrations of analog modems into IP telephony.

We tried this with 827-4v model and had many troubles.

Any ideas what´s the best way with 827-4v model or alternatives.

Many thanks in advance

August / NTS

1 REPLY
Anonymous
N/A

Re: Integration analog modems into IP telephony

You can go for Cisco VG248 Analog Phone Gateway which will allow you to support your legacy analog devices in an IPT environment. VG248 is a high-density gateway for using analog phones, fax machines, modems, voice-mail systems, and speakerphones within an enterprise voice system based on Cisco CallManager. It offers 48 analog phone lines to be used as extensions to the Cisco CallManager.

See this document for the configuration:

http://www.cisco.com/en/US/products/hw/gatecont/ps2250/products_configuration_guide_chapter09186a0080117ea2.html#xtocid15

The complete software configuration guide for VG248 can be found here:

http://www.cisco.com/en/US/products/hw/gatecont/ps2250/products_configuration_guide_book09186a0080117e9d.html

244
Views
0
Helpful
1
Replies
CreatePlease login to create content