Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Interchange dauhtger card WS-F6K-FE48-AF

Hi everybody, I have a switch 6503 with a WS-X6148-45AF card and WS-F6K-FE48-AF dauhtner card, It?s possible remove the dauhtger card and insert it on WS-X6148-RJ-21 card, and this works with PoE on switch 6506, the switch 6506 has two power suplies WS-CAC-2500W. Both switches work witch CATOS 8.3(7).

thanks and best regards

2 REPLIES

Re: Interchange dauhtger card WS-F6K-FE48-AF

Community Member

Re: Interchange dauhtger card WS-F6K-FE48-AF

thanks for your response, I found this link http://www.cisco.com/en/US/products/hw/switches/ps708/products_white_paper0900aecd80233a77.shtml where it can be possible to insert daugther card on RJ-21 card, but I have a little doubth, in the text mentioned the following:

**To upgrade a WS-X6148-RJ-45 or WS-X6148-RJ-21 to IEEE 802.3AF power via the WS-F6K-FE48-AF PoE daughter card, order WS-X6148-45AF-UG= and WS-X6148-21AF-UG=, respectively.

So I understand that i need to buy the upgrade ? or only insert the daugther card and that?s all.

thanks

717
Views
0
Helpful
2
Replies
CreatePlease to create content