Solved: Intercluster trunk and Display (Internal Caller ID) transmission

marcel.schmidt · ‎06-27-2003

HI everybody,

we have 2 callmanagers connected via intercluster trunk. How can I transmit the Display (Internal Caller ID) over the intercluster trunk? Does it work?

Can anybody tell me how, if?

Regards

Marcel

tringwelski_2 · ‎06-27-2003

Yes this sould work, it may have to do with CSS, and Partitions, also check you ICTrunk configurations as well.

View solution in original post

dugrant · ‎06-27-2003

Make sure that under your trunk configuration on both sides you have "Display IE Delivery" checkbox checked.

You can also do a detailed CCM trace, and use Q.931 translator (found in cisco\bin) to decode the H.225 messages in the trace. The decoder will show you whether CCM is sending/receiving the Display IE.

View solution in original post

tringwelski_2 · ‎06-27-2003

Yes this sould work, it may have to do with CSS, and Partitions, also check you ICTrunk configurations as well.

paul.harrison · ‎06-27-2003

Marcel,

Are you using different versions of Call Manager? If so this may be your problem because from version 3.1 name display has been supported for inter-cluster calls.

Paul

dugrant · ‎06-27-2003

Make sure that under your trunk configuration on both sides you have "Display IE Delivery" checkbox checked.

You can also do a detailed CCM trace, and use Q.931 translator (found in cisco\bin) to decode the H.225 messages in the trace. The decoder will show you whether CCM is sending/receiving the Display IE.