I have a question regarding the Intercom feature on my CCME (a 3745). Currently we have 15 users that want to be able to establish an intercom connection to each other separately. User A want to be able to intercom to user B, and then C, and the G.
In the sample configs on CCO they only show the way to configure it as user A to user B and designate a button on the phone for it. Now, I have 15 users who want to do that, which means that I would need 14 buttons to get this resolved.
Is there a way to make this work with one button only where a user would dial a number and establish an intercom connection like that? Something like IntercomParking...?
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...