Cause i = 0x80E470 - Invalid information element contents
Anyone have any ideas on why this fails. I have set the T310 to 60000 msec. on both the gateway and CCM. I have the h323 gateway "called party IE number type set to unknown and international-no results. and set the "called number plan" to isdn--no results.
You have invalid IE, this means we are sending something the telco doesnt like. They may want to see a differnet type and plan or a different called number. You may want to ask them what they want to see. If you cant call them, try changing the plan and type to international or anything to see if it works.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...