How to veifry the default de-jitter configuration ? And, other than 12.1(5)T, what are the other IOS version that supports the playout delay enhancement feature ? This is because, I believe that the jitter problem in my current VoIP infrastructure is significant and hence I need to clarify the existing (default) de-jitter buffer so that I know that whether it is good enough to battle against the large delay variation (jitter) problem. I am seeing a lot of "Late Packets" which resulted in voice packet loss due to large jittering effect and not because of the high link utlization. Please help on what are the IOS that supports the playout delay feature. Thanks !
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...