Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

IOS Gatekeeper / h3.23 Gateway / Interfaces

Hi, which routers can use a IOS Gatekeeper ?

If i want to do it:

PBX - ROUTER GATEWAY - WAN - ROUTER - ATA186 - PBX

How can i connect several ATA`S( CALLS) into a PBX - ROUTER GATEWAY( INTERFACES, E&M ?) ?

THANKS

3 REPLIES
New Member

Re: IOS Gatekeeper / h3.23 Gateway / Interfaces

Hi!

For gatekeeper feature, use routers from 2600 on (I think all following routers have GK). I think 1700 doesn't support GK.

If you want to have GK and GW in the same box, 2600 or 3600 are good choice (depending on quantity of calls of course).

I haven't worked with ATA-s, but there should be no problem... just regg them to GK.

Good luck,

Nikola

Silver

Re: IOS Gatekeeper / h3.23 Gateway / Interfaces

You can also use a 2500 as a gatekeeper. Use the IP/H323 feature set.

ATA's work fine with gatekeepers.

New Member

Re: IOS Gatekeeper / h3.23 Gateway / Interfaces

I would verify that one can connect the FXS of the ATA to a legacy PBX. Further, use a great deal of care when using H.323 gatekeeper for call admission! Gatekeeper has no visibilty beyond its configured zone(s). If your calls traverse several links you could be in danger of voice over-running the PQ's at each of the intermediate hops. Consider RSVP...

99
Views
0
Helpful
3
Replies
CreatePlease to create content