04-27-2006 11:04 AM - edited 03-13-2019 01:05 PM
Hi,
Voip Network: PBX connected to Cisco3800 using NMHDV; router working as voice gateway.
When my extenion makes call thru Cisco, router sends the actual CLI (043664741)to other h323 router. I want this 'specific' CLI to be translated to another series 08718553333.
i have to use translation rule or profiles...but some how it is not working.. any help..
04-27-2006 12:11 PM
Please paste your configs.
regards,
Anup
04-27-2006 12:14 PM
You could use a combination of a translation rule and a translation profile which then is applied to a dial peer, such as:
voice translation-rule 3
rule 1 /043664741/ /08718553333/
voice translation-profile profile1
translate calling 3
dial-peer voice 10 pots
translation-profile outgoing profile1
Voice Translation Rules
http://www.cisco.com/en/US/tech/tk652/tk90/technologies_tech_note09186a0080325e8e.shtml
Hope this helps. If so, please rate the post.
04-28-2006 10:42 AM
04-29-2006 10:52 AM
The translation rule looks good. Apply it to the dial-peer, as below
dial-peer voice 1000 voip
translation-profile outgoing skyi
Regards,
Anup
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide