IP Communicator Conflict w/Visual Studio Debugger

[3tciscosupport]

Has anyone ever encountered the error "Unable to start debugging on the web server."

- VS 2005

- IP Communicator 2.0(2)

[stephan.steiner]

No.. and a little more info wouldn't hurt. What exactly are you trying to debug? An application running on the IIS on your box? That will turn out to be problematic as IPC, as every other Cisco phone, runs a webserver on port 80.. so your port 80 will be blocked when the IPC is running.

[3tciscosupport]

Yes, that's exactly what's happening. Is there any way to change the port that the IPC webserver uses?

Thanks.

[Sascha Monteiro]

look at this thread,

http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Unified%20Communications%20and%20Video&topic=IP%20Phone%20Services%20for%20End%20Users&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.1ddc9bcd/4#selected_message

you can disable the port on IPC, but not change it