IP Communicator issue through CheckPoint SecuRemote VPN Client
When using IP Comm 22.214.171.124 through a CP SecuRemote VPN Client connection, we are a) unable to hear the VM greeting or leave VM when calling an internal ext; b)retrieve VM; c)no audio in either direction when two users connect via VPN using IP Comm; d)register w/CM over wireless through VPN.
We are able to make "in network" (4-digit dial) calls and make external calls normally with IP Communicator through the VPN client. VM can be left to an external number (cell, other) fine but not to our Cisco IP Phones. We also use Unified Messaging.
The call manager version is 4.1.(3)
- The OS version is 4.4.8.sr7
CheckPoint NGX Firewall / Nokia IPSO R60_HFA_05. We are not issuing DHCP addresses to VPN clients when connected. No drops are seen in the FW logs.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...