Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

IP Communicator on a Dell 5150 laptop

Until this morning I had IPC installed and working on this laptop without problems, but due to other issues with the laptop I reformatted the drive and started over. I am currently running Windows XP SP2. Once I get IPC installed and try to make a call I hear a lot of static, and when I have placed calls there was a long delay and the voice was very slow. I am connected to the same switch, switch port, and network cable as before the reinstall.

I'm thinking it is something with the way the NIC is configured. It's a Broadcom 440x integrated card. I tried a different switch port and different network cable, but that didn't help either.

Any suggestions on what might be causing this?

Thanks

1 REPLY
Silver

Re: IP Communicator on a Dell 5150 laptop

The static could be caused by many causes. Refer thr document on how to resolve the noise.

http://www.cisco.com/en/US/tech/tk652/tk698/technologies_tech_note09186a00800a9982.shtml

117
Views
0
Helpful
1
Replies
CreatePlease to create content