We are having issues with running IP Communicator, when logged on as a standard user. If we log on the a PC with admin rights, IPC loads fine, no problem. If we log on as a standard user with no admin rights, IPC seems to try and load something,about 15 - 20 times, gives up, then loads OK.
Has anyone else come across this before? Do we need to give the users any added rights?
This may help - from the version 2.0 admin guide - "Additionally, if your company uses Cisco IP Communicator in an environment where users do not have administrative privileges, and if multiple users share a PC, you must run Cisco IP Communicator one time after installation using an administrator account on each machine and select a device name and TFTP server, if required. Those settings will remain with the PC; all other settings in this environment will follow the user." The rights are Local administrator rights. Here is the link - http://www.cisco.com/en/US/customer/products/sw/voicesw/ps5475/products_administration_guide_chapter09186a00805f085a.html
Are you getting this error “Installer User Interface Mode Not Supported. The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The value UI mode identifiers...
The below trick might come handy when you have to add a new node to a cluster but you don't have or is unsure of the security password for the publisher. This procedure has been around for ages.
1) Login into the CLI of the Publisher.