Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

IP Communicator thru a VPN

How to configure a connection thru a VPN to allow use of IP Communicator from home.

5 REPLIES
New Member

Re: IP Communicator thru a VPN

If you are using cisco VPN client u can login

into the network and give the ip address of callmanager in communicator.

New Member

Re: IP Communicator thru a VPN

Thanks, I have done this, set a static route in the router to call manager, but IP Communicator won't register. I can access user configuration page. I did find something about "stateful firewall". This setting is mandated by our service. Could this be the issue?

New Member

Re: IP Communicator thru a VPN

Let me know how u r logging into the network.Using VPN client?Is it behind any firewall?

New Member

Re: IP Communicator thru a VPN

Yes it is. Unfortunately, I have no control over the firewalls. Our Internet access is thru our Core Processor. Stateful firewall is also mandatory on the VPN client. I do know tha PING is disabled thru their network, not sure if anything else is.

New Member

Re: IP Communicator thru a VPN

These may be a stupid questions.

Can you TFTP to the TFTP/Call Manager server?

Have you added the server address to the Network Tab section of IP Comm preferences?

Is the correct network adapter showing?

and lastly is the MAC entered into CCM Pub?

I do know you VPN connection needs to pass

TFTP, CDP, DHCP traffic.

199
Views
3
Helpful
5
Replies