Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

ip phone bandwidth

hi

whats the acceptable bandwidth for an ip phone conversation ?

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Red

Re: ip phone bandwidth

Hi Bill,

The bandwidth requirements vary depending on what Codec is being used. Here is some related info. The first doc has a good link to the TAC Voice Bandwidth Calculator which is very helpful;

Voice Over IP - Per Call Bandwidth Consumption

http://www.cisco.com/en/US/tech/tk652/tk698/technologies_tech_note09186a0080094ae2.shtml

Q. What are the voice bandwidth requirements for different codecs?

A. Voice bandwidth requirements are:

G.711 - 106 Kbps (50 pps, 200 byte long packets)

G.729 - 44 Kbps (34 pps, 60 byte long packets) (default)

G.723 - 30 Kbps (34 pps, 64 byte long packets)

http://www.cisco.com/en/US/products/hw/routers/ps380/products_qanda_item09186a0080093e46.shtml#qa2

Hope this helps!

Rob

1 REPLY
Hall of Fame Super Red

Re: ip phone bandwidth

Hi Bill,

The bandwidth requirements vary depending on what Codec is being used. Here is some related info. The first doc has a good link to the TAC Voice Bandwidth Calculator which is very helpful;

Voice Over IP - Per Call Bandwidth Consumption

http://www.cisco.com/en/US/tech/tk652/tk698/technologies_tech_note09186a0080094ae2.shtml

Q. What are the voice bandwidth requirements for different codecs?

A. Voice bandwidth requirements are:

G.711 - 106 Kbps (50 pps, 200 byte long packets)

G.729 - 44 Kbps (34 pps, 60 byte long packets) (default)

G.723 - 30 Kbps (34 pps, 64 byte long packets)

http://www.cisco.com/en/US/products/hw/routers/ps380/products_qanda_item09186a0080093e46.shtml#qa2

Hope this helps!

Rob

117
Views
0
Helpful
1
Replies
CreatePlease login to create content