I'm having a weird issue which I hope someone can shed some light on. The setup is a PIX 515 at HQ, and an 827-4V at home. ISP and VPN connection is solid with good latency. The Softphone works perfectly, inbound and outbound. The IP Phone (7960) comes online and can receive calls just fine, although any attempt to make an outbound call locks up the phone for appx 30 seconds then resets. This occurs immediately after an 'accurate' phone number is dialed according to the dial plan.
'fixup skinny' is enabled on the PIX, and I'm using G.729a.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...