A Pix is connected to 3 - switches on different interfaces say (inside, dmz and Lab). Each switch is in a different VLAN. CCM ( Cisco Call Manager) Server is on inside. Now only the IP phone connected to the switch in Inside are able to call each other. But the ip phone in DMZ and LAB are not able to process any call but they are able to register themselve on CCM and dail tone can also be heard on those phones. If u call any other phone even in dmz and lab i can here the ringing tone but on the other phone there is no ring.
On my PIX i have opened all the IP traffic for each other interfaces.
Can somebody suggest me what could be the problem and is there anything I need to configure on the PIX. Plz send any link that u think can help me.
Are you getting this error “Installer User Interface Mode Not Supported. The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The value UI mode identifiers...
The below trick might come handy when you have to add a new node to a cluster but you don't have or is unsure of the security password for the publisher. This procedure has been around for ages.
1) Login into the CLI of the Publisher.