We are currently using callmanager and cat 3524s. With roughly 150 PCs and 130 phones, we are currently using a single VLAN for voice and data. Since we are growing and adding a 2nd building (connected vi fiber) we are replacing the 3524s w/ (2) cat 4006s. Is there a guidline for switching to seperate VLANs, or is it simply based on performance monitoring? We anticpate growing to ~250 PCs and 200 phones. Any advice is appreicated.
Just out of curiosity, Are you doing any type of QOS with all your voip and pc's on the same Vlan? or Is it just working with a native, non qos setup? Just Curious as we are putting in installations that Size and always looking at different ways of doing things.
Are you getting this error “Installer User Interface Mode Not Supported. The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The value UI mode identifiers...
The below trick might come handy when you have to add a new node to a cluster but you don't have or is unsure of the security password for the publisher. This procedure has been around for ages.
1) Login into the CLI of the Publisher.