IP-To-IP Gateway support for PGW-2200

[pax_2111]

Hi there,

Does any one know whether support for PWG-2200 softswitch is verified for IP-to-IP gateway in any new IOS release?

I couldn't find any relevant info yet.

If someone has a similiar configuration I would like to share the experience, as I am having trouble with these two working together; calls from the PGW-2200 side are being dropped on the IP-To-IP gateway.

Any insight will be appreciated.

regards

[a-vazquez]

Here you see how to add an IP link to the gateway:

http://www.cisco.com/univercd/cc/td/doc/product/access/sc/rel9/prvgde/r9mmlchg.htm#1060480

Now that you have added the IP link you can configure the nailed trunks

This is ussing the mml caomand method for one cic and bearer:

http://www.cisco.com/univercd/cc/td/doc/product/access/sc/rel9/prvgde/r9mmlchg.htm#1021012

This is the command for adding more that one at a time:

http://www.cisco.com/univercd/cc/td/doc/product/access/sc/rel9/prvgde/r9mmlchg.htm#26577

Here look for the Provisioning a Nailed Configuration for an explanation of the parameters in the

above url:

http://www.cisco.com/univercd/cc/td/doc/product/access/sc/rel9/prvgde/r9plnprv.htm#74227