Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

IP-To-IP Gateway support for PGW-2200

Hi there,

Does any one know whether support for PWG-2200 softswitch is verified for IP-to-IP gateway in any new IOS release?

I couldn't find any relevant info yet.

If someone has a similiar configuration I would like to share the experience, as I am having trouble with these two working together; calls from the PGW-2200 side are being dropped on the IP-To-IP gateway.

Any insight will be appreciated.

regards

1 REPLY
Silver

Re: IP-To-IP Gateway support for PGW-2200

Here you see how to add an IP link to the gateway:

http://www.cisco.com/univercd/cc/td/doc/product/access/sc/rel9/prvgde/r9mmlchg.htm#1060480

Now that you have added the IP link you can configure the nailed trunks

This is ussing the mml caomand method for one cic and bearer:

http://www.cisco.com/univercd/cc/td/doc/product/access/sc/rel9/prvgde/r9mmlchg.htm#1021012

This is the command for adding more that one at a time:

http://www.cisco.com/univercd/cc/td/doc/product/access/sc/rel9/prvgde/r9mmlchg.htm#26577

Here look for the Provisioning a Nailed Configuration for an explanation of the parameters in the

above url:

http://www.cisco.com/univercd/cc/td/doc/product/access/sc/rel9/prvgde/r9plnprv.htm#74227

197
Views
0
Helpful
1
Replies
CreatePlease login to create content