Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

ray
New Member

IPICS LMR Tailing Issue On Radios

Does anyone have any config. examples for voice ports of a 2811 router connected to Kenwood radios? We are having a hard time fine tuning a tailing issue. Tailing = Radio 1 transmits, Radio 2 recieves transmission but must wait at least 5 seconds before reply. We would like radio 2 to be able to reply within a second.

2 REPLIES
Silver

Re: IPICS LMR Tailing Issue On Radios

Is there a certain distance they are able to get away from the radios that the switches no longer cause a problem?

This URL should help you:

http://www.cisco.com/en/US/products/ps6718/prod_brochure0900aecd80352c7e.html

http://www.cisco.com/en/US/products/ps6712/products_announcement0900aecd803498d8.html

ray
New Member

Re: IPICS LMR Tailing Issue On Radios

Thank you for the responce. None, no distance.

There is always a tail at the end of every radio transmition. The Kenwood radios have a higher tail squelch sound. The E&M port thinks the squelch is audio signal.

Thank you for the links.

ray

146
Views
0
Helpful
2
Replies