I'm having an issue with MWI in my IPMA configuration. Call Mgr 4.1.3. Unity 4.1. I can call and leave a VM for the Manager, however MWI does not light. I can call the MWI On and Off numbers from the Manager phone and everything works. All VM Ports support MWI and their CSS contains the PT of the IPMA Route Point....but not the PT of the Manager's extension. Is this my problem? Thanks.
Thanks for your reply. Do you mean the CSS of the MWI or the CSS of the VM Port? I can dial the MWI On/Off numbers and they control the Manager phone's light. Therefore, the MWI CSS is correct. Do you agree?
Thank you. I actually had the IPMA MGR PT defined to the MWI CSS. As I was troubleshooting, I added that PT to the CSS and was able to dial MWI On from the Manager Phone and turn on the light. But Unity still will not turn on MWI.
Does the VM Ports need to the IPMA Mgr PT in their CSS? Currently, only the IPMA Route Point PT is defined to the VM Ports CSS.
Are you getting this error “Installer User Interface Mode Not Supported. The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The value UI mode identifiers...
The below trick might come handy when you have to add a new node to a cluster but you don't have or is unsure of the security password for the publisher. This procedure has been around for ages.
1) Login into the CLI of the Publisher.