Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

IPMA Redundancy

Hello guys!!!

I´m configuring IPMA in proxy line mode. I have 2 CCM with the ipma service active

I know that we can get redundancy in this cases. But I don´t know if I need to configure something into IPMA attendant console to the redundancy work.

1 ACCEPTED SOLUTION

Accepted Solutions

Re: IPMA Redundancy

You will just need to configure the primary and backup CTI and IPMA servers in Service -> Service Parameters -> IPMA. If the primary is unavailable, the backup will be used.

Hope this helps. If so, please rate the post.

Brandon

4 REPLIES

Re: IPMA Redundancy

You will just need to configure the primary and backup CTI and IPMA servers in Service -> Service Parameters -> IPMA. If the primary is unavailable, the backup will be used.

Hope this helps. If so, please rate the post.

Brandon

New Member

Re: IPMA Redundancy

Many Thanks Bradon!!!

I have already configured those parameters.

I did a test and all is working fine.

Re: IPMA Redundancy

Hi Everybody,

I have an ipma redundancy issue. I have 2 servers with ipma service parameters configuring fine but when i put the subscriber out of service, we aren't able to login with ipma console. The proxy line mode become unvailable in the manager phone.

can you help me please ?

Joseph

New Member

Re: IPMA Redundancy

you must activate ipma service on both servers

551
Views
0
Helpful
4
Replies