We have multiple sites in Europe and Asia that rather go with ISDN BRI then Analog Circuits for the remote sites. Has anybody configured the VIC-2BRI-S/T-TE Vics? Will Called ID work,Name Party ID,etc...Stephen
ISDN BRI VICs will work on 1751, 1760, 2600 and 3600 routers. If the telco can provide it, you will get Caller ID, but I don't think caller name is supported on them. Have a look at the following URL for info on configuring the BRI VICs -
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...