Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

is it possible to make incoming call silent?

Hi, we have a phone (7975) configured to contain 4 extensions numbers of exentsion mobility (7601, 7602, 7603, 7604), 3 of the extensions was assigned to 3 different users loggin to 3 different phones(A: 7602, B: 7603, C: 7604). Currently when calls to any of the extension A, B, or C, the 7975 and one of the A, B, C will ring. Is it possible to make the 7975 silent (only flashing) when incoming call to any of the extension A, B, C, and other phones ringing?

for example, if incoming call to A, currently 7975 will ring, phone login with A will ring. is it possible: Phone A ring but 7975 silent but signal incoming calls to by flashing extesion line A?

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Red

Re: is it possible to make incoming call silent?

Hi Shu,

On the config for the 7975 change these settings for 7602, 7603 and 7604 (under Directory Number Configuration);

Line Settings for this Device

Ring Setting (Phone Idle) Flash Only

Ring Setting (Phone Active) Flash Only

Hope this helps!

Rob

1 REPLY
Hall of Fame Super Red

Re: is it possible to make incoming call silent?

Hi Shu,

On the config for the 7975 change these settings for 7602, 7603 and 7604 (under Directory Number Configuration);

Line Settings for this Device

Ring Setting (Phone Idle) Flash Only

Ring Setting (Phone Active) Flash Only

Hope this helps!

Rob

179
Views
0
Helpful
1
Replies
CreatePlease to create content