Has anyone deployed ATA-186s using the latest mgcp/skinny firmware (v2-12-ms-1129b-1)?
I have upgraded one test unit and set it up in call manager as a 7960 phone using skinny. It seems to handle faxes at 14.4k, gives a stutter tone for MWI and generally seems like a huge improvement in compatibility with CM.
I'm interested in whether anyone has run into any problems like the v12.2-0928a firmware which fixed stability and dtmf passing problems, but broke the gateway setting.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...