Is there a network design guide that focuses on IP/TV
It seems like IP/TV has taken a back-seat to VoX as far as documentation on CCO is concerned. While there are plenty of exmaples and a design guide that focuses on VoX, IP/TV and video in general doesn't seem to have quite the coverage, and not all of the items that are important in have analogs with VoX.
The IP/TV manuals don't really specify anything as far as provisioning IP/TV in a FR WAN environment, best queuing techniques, how CBWFQ/LLQ interacts with FRTS, etc.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...