Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Is there a way to list the DN's in a voice gateway?

We are a UCM 8.6 shop. What I would like is a way to list all the FXS ports and their associated DN's. At the moment to identify a DN assigned to an FXS port you have to click on the port. If you have lots of FXS ports this is incredibly time consuming. Does anyone know if there is way to list this?

Everyone's tags (1)
Cisco Employee

I know this is an old post;

I know this is an old post; however, it is still marked as unanswered. There may be a better better way; however, here is how I went about it:

router#show run | i voice-port|station-id
voice-port 0/2/0:23
voice-port 0/1/0
voice-port 0/1/1
 station-id number 5742016
voice-port 0/2/1:23

This will include more than just your FXS ports; however, you can easily identify which ports are only FXS with the command below:

router#show voice port summary | i fxs-
0/1/0           --  fxs-ls      up    dorm on-hook  idle     y
0/1/1           --  fxs-ls      up    dorm on-hook  idle     y

Thanks +5 , it helped.

Thanks +5 , it helped.