Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

ISDN BRI - poor voice quality

I've got a 2620 with a VIC-2BRI-S/T-TE installed. However, when calls are placed/received over the PSTN via 64k isdn BRI lines , both parties experience poor quality audio(hissing/muffled). Internally all ok. No VAD.

Any feedback appreciated.

3 REPLIES
Bronze

Re: ISDN BRI - poor voice quality

Hi,

check your compand-type (a- or u- laW) on the voice-ports.

mehmet

New Member

Re: ISDN BRI - poor voice quality

Hi Mehmet

voice-port set to u-law with no improvement.

New Member

Re: ISDN BRI - poor voice quality

What type of QoS are you using? How many simultaneous calls are you trying to place at a time? Are you sure that VAD is disabled?

You might want to take a look at the following documents in regards to configuring Voice and ISDN.

http://www.cisco.com/en/US/tech/tk652/tk701/technologies_tech_note09186a00801006c6.shtml

http://www.cisco.com/en/US/products/sw/iosswrel/ps1830/products_feature_guide09186a0080087940.html

tm

Tim Medley, CWNA, CCDP, CCNP+Voice

http://www.iptnetworkers.com

606
Views
0
Helpful
3
Replies