Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

ISDN errors since IOS upgrade to 12.2(11)T

hello,

A few days ago I have been upgraded 2 of my 3660 routers to IOS version 12.2(11)T.

one 3660 has 1 voice E1

second 3660 has 4x voice BRI interfaces acting as network side for PBX

since upgrade on the second router I observe errors like below for each - on the other not. it seems call success does not deppend on that error, but I wondering what is that? I cannot find any info on TAC...

Piotr

====

Oct 17 14:38:01: ISDN **ERROR**: Module-lif Function-LIF_AddTimer Error-Unknown Class.

Oct 17 14:38:01: ISDN **ERROR**: Module-lif Function-LIF_AddTimer Error-Unknown Class.

Oct 17 14:38:01: ISDN **ERROR**: Module-lif Function-LIF_AddTimer Error-Unknown Class.

Oct 17 14:38:01: ISDN BR2/0 Q931: TX -> SETUP_ACK pd = 8 callref = 0xF1

Channel ID i = 0x8A

====

5 REPLIES
Cisco Employee

Re: ISDN errors since IOS upgrade to 12.2(11)T

Please open a TAC case for this issue.

Thanks

Community Member

Re: ISDN errors since IOS upgrade to 12.2(11)T

I do not have a contract ;) best regards

Community Member

Re: ISDN errors since IOS upgrade to 12.2(11)T

I'v been upgraded router IOS to 12.2.(11)T1. problem disapear. now I'v got other. After restart at first call I made router said:

Oct 17 22:20:57: ISDN BR2/0 Q931: TX -> PROGRESS pd = 8 callref = 0xC0

Progress Ind i = 0x8288 - In-band info or appropriate now available

Oct 17 22:21:02: ISDN BR2/0 Q931: TX -> PROGRESS pd = 8 callref = 0xC0

Progress Ind i = 0x8282 - Destination address is non-ISDN

Oct 17 22:21:05: %ALIGN-3-SPURIOUS: Spurious memory access made at 0x60E2F6F4 reading 0x89

Oct 17 22:21:05: %ALIGN-3-TRACE: -Traceback= 60E2F6F4 60115D3C 601203A0 6010C154 00000000 00000000 00000000 00000000

====

that's nice ;) regards

====

Cisco Internetwork Operating System Software

IOS (tm) 3600 Software (C3660-IS-M), Version 12.2(11)T1, RELEASE SOFTWARE (fc2)

TAC Support: http://www.cisco.com/tac

Copyright (c) 1986-2002 by cisco Systems, Inc.

Compiled Sat 28-Sep-02 11:04 by ccai

Image text-base: 0x60008940, data-base: 0x618A0000

ROM: System Bootstrap, Version 12.0(6r)T, RELEASE SOFTWARE (fc1)

foR-1-1 uptime is 56 minutes

System returned to ROM by reload at 22:15:10 CET Thu Oct 17 2002

System restarted at 22:16:04 CET Thu Oct 17 2002

System image file is "slot0:c3660-is-mz.122-11.T1.bin"

cisco 3660 (R527x) processor (revision 1.0) with 98304K/32768K bytes of memory.

Processor board ID JAB0444C09D

R527x CPU at 225Mhz, Implementation 40, Rev 10.0, 2048KB L2 Cache

Bridging software.

X.25 software, Version 3.0.0.

SuperLAT software (copyright 1990 by Meridian Technology Corp).

Basic Rate ISDN software, Version 1.1.

3660 Chassis type: ENTERPRISE

1 Ethernet/IEEE 802.3 interface(s)

2 FastEthernet/IEEE 802.3 interface(s)

2 Serial network interface(s)

4 ISDN Basic Rate interface(s)

8 Voice NT or TE BRI interface(s)

DRAM configuration is 64 bits wide with parity disabled.

125K bytes of non-volatile configuration memory.

8192K bytes of processor board System flash (Read/Write)

16384K bytes of processor board PCMCIA Slot0 flash (Read/Write)

Configuration register is 0x2102

====

Community Member

Re: ISDN errors since IOS upgrade to 12.2(11)T

I have also described ISDN errors with 12.2.(11)T on a cisco 1760 router. I'll try to upgrade too to 12.2.(11)T1. And let the results know.

Rob

Community Member

Re: ISDN errors since IOS upgrade to 12.2(11)T

Here is a link to explain the error.

http://www.cisco.com/warp/public/63/spuraccess.html#first

I have seen that many times...that is definately a TAC issue.

*** www.iptnetworkers.com ***

103
Views
0
Helpful
5
Replies
CreatePlease to create content