Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

isdn failiure

UK based, I have a vic2 2bri interface card. running CME 4.1. I cannot make an outgoing call, on either port I get the error Cause i = 0x82E4 - Invalid information element contents. I know that the Isdn line is good as we have used an Avaya system on the isdn2 and that works o.k. layer 1 and 2 is up and switch-type is basic net3.

if anyone has any ideas?

2 REPLIES
Hall of Fame Super Gold

Re: isdn failiure

Hi,

Can you send the complete output of "debug isdn q931" ? You must be placing the calls with some wrong parameter, like type national instead of unknown, etc.

New Member

Re: isdn failiure

I have managed to correct the issue.

I needed compand type alaw command in the voice-port interface. many thanks for your help paolo

156
Views
0
Helpful
2
Replies