isdn incoming-voice ...

[rowind]

Hello,

Does anyone know why I haven't the command option:

isdn incoming-voice etc. while I'm in BRI interface mode?

I have the following:

Cisco 1760

VIC 2B-NT/TE (slot 1)

VIC 2FXS (slot 0)

IOS 12.2(11)T

(I do have a ougoing-voice ... -option)

Thanx,

Rob Wind

[rickb]

Do you at least have IP Plus as your feature set?

[rowind]

Yes,

I have IP/VOX PLUS. Strange isn't it? Does the slot matter in which I installed the VIC 2b-NT/TE? It's in slot 1.

Rob

[bgibson]

I have a similar problem. The voice-port command is missing. I can set up my dial-peers. I can set up the PRI. I can set up the MGCP stuff. But I can't configure the actual voice-ports.

This is my first attempt at a MGCP gateway. Can anyone give me some guidance as to why the command be missing. I am using 12.2(11)T image name is c3640-is-mz.122-11.T.bin

[rowind]

I load an older version: 12.2(8)YM. For the cisco 1760 there's bug in it (according to Cisco).

Rob