I have a H323 Gatekeeper and a 2600 router with a VIC-2BRI-NT/TE module. This module is connected to public ISDN. I would like, receiving a call, to pass the last digit of the called number to the gatekeeper. In this way an internal user can be reached directly.
Example: said +39-085-4221X our ISDN number with x=0,1,2,3,4 I would like the gatekeeper to receive from the router the last X digit to pass throught the call at the internal user that has extension X-
I need to receive (fully o partially) the number the external user has called via H323 protocol.
I would like to use the Cisco router as a gateway in my network, where the gatekeeper is Microsoft ISA Server. ISA should receive the called number and would take care of routing it to the end user's PC that runs Netmeeting.
Are you getting this error “Installer User Interface Mode Not Supported. The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The value UI mode identifiers...
The below trick might come handy when you have to add a new node to a cluster but you don't have or is unsure of the security password for the publisher. This procedure has been around for ages.
1) Login into the CLI of the Publisher.