Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Issue after upgrading IOS

Hi All,

I was trying to upgrade a voice gateway AS5350XM from 12.4T(20)T4 to 15.1(1)T5 and the voice gateways loaded with the new IOS, however the voice-port configuration gone. I tried to configure the connection plar under voice-port but I got below error

connection plar is not allowed on NP DFC

Any idea???

Regards,

M.Sherif

3 REPLIES
Hall of Fame Super Gold

Issue after upgrading IOS

You can use a translatio rule to translate all called number to the destination that you want.

New Member

Issue after upgrading IOS

Hi Paolo,

I already tried the translation rule but it didn't work, kindly check below configuration and debug

voice translation-rule 2

rule 1 /.*/ /9344/

!

!

voice translation-profile Divert1

translate called 2

!

voice-port 3/0:0

translation-profile incoming Divert1

!

HOIPCCVG2#test voice translation-rule 2 5

Matched with rule 1

Original number: 5      Translated number: 9344

Original number type: none      Translated number type: none

Original number plan: none      Translated number plan: none

HOIPCCVG2#

HOIPCCVG2#

HOIPCCVG2#test voice translation-rule 2 0015

Matched with rule 1

Original number: 0015   Translated number: 9344

Original number type: none      Translated number type: none

Original number plan: none      Translated number plan: none

HOIPCCVG2#test voice translation-rule 2 920003344

Matched with rule 1

Original number: 920003344      Translated number: 9344

Original number type: none      Translated number type: none

Original number plan: none      Translated number plan: none

HOIPCCVG2#debug voip dialpeer

HOIPCCVG2#sh voic cal sum

PORT           CODEC     VAD VTSP STATE            VPM STATE

============== ========= === ==================== ======================

3/0:0.1         g711ulaw   n  S_DIGIT_COLLECT       CSM_IC7_CONNECTED      

HOIPCCVG2#debug voip dialpeer

*Oct 20 09:15:56.177: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:

   Calling Number=506184032, Called Number=9344, Voice-Interface=0x0,

   Timeout=TRUE, Peer Encap Type=ENCAP_VOICE, Peer Search Type=PEER_TYPE_VOICE,

   Peer Info Type=DIALPEER_INFO_SPEECH

*Oct 20 09:15:56.177: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:

   Result=Success(0) after DP_MATCH_INCOMING_DNIS; Incoming Dial-peer=1

*Oct 20 09:15:56.177: //-1/xxxxxxxxxxxx/DPM/dpMatchSafModulePlugin:

   dialstring=NULL, saf_enabled=0, saf_dndb_lookup=0, dp_result=0

*Oct 20 09:15:56.357: %SYS-3-INVMEMINT: Invalid memory action (malloc) at interrupt level -Traceback= 0x6394DC40z 0x620F091Cz 0x620ECD08z 0x620ECF30z 0x620ED5DCz 0x620E9E40z 0x626346CCz 0x62635408z 0x626011A0z 0x62603D70z 0x62B84D38z 0x602E42D4z 0x602E0E6Cz 0x602E1E08z 0x6026505Cz 0x60267644z

*Oct 20 09:15:56.357: %SYS-2-MALLOCFAIL: Memory allocation of 512 bytes failed from 0x620FC134, alignment 0

Pool: Processor  Free: 240350408  Cause: Interrupt level allocation

Alternate Pool: None  Free: 0  Cause: Interrupt level allocation

-Process= "", ipl= 3

*Oct 20 09:16:03.621: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:

   Calling Number=505911063, Called Number=9344, Voice-Interface=0x0,

   Timeout=TRUE, Peer Encap Type=ENCAP_VOICE, Peer Search Type=PEER_TYPE_VOICE,

   Peer Info Type=DIALPEER_INFO_SPEECH

*Oct 20 09:16:03.621: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:

   Result=Success(0) after DP_MATCH_INCOMING_DNIS; Incoming Dial-peer=1

*Oct 20 09:16:03.621: //-1/xxxxxxxxxxxx/DPM/dpMatchSafModulePlugin:

   dialstring=NULL, saf_enabled=0, saf_dndb_lookup=0, dp_result=0

*Oct 20 09:16:03.825: %SYS-3-INVMEMINT: Invalid memory action (malloc) at interrupt level -Traceback= 0x6394DC40z 0x620F091Cz 0x620ECD08z 0x620ECF30z 0x620ED5DCz 0x620E9E40z 0x626346CCz 0x62635408z 0x626011A0z 0x62603D70z 0x62B84D38z 0x602E42D4z 0x602E0E6Cz 0x602E1E08z 0x6026505Cz 0x60267644z

HOIPCCVG2#

Regards,

Mohamed Sherif

New Member

Re: Issue after upgrading IOS

Any idea !!!

Regards,

M.Sherif

618
Views
0
Helpful
3
Replies