Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Issues with a Credit Card Machine using a VG202

Has anyone run into any issues with using CC machines with using SCCP on a VG202?

Setup: 2 CC Machines--> VG202 --> connecting to Call Manager 8.6 using DHCP.  Both of my CC machines work fine doing a normal CC transaction, but at the end of the day the client runs a batch report on the cc machine but the cc machine will time out after 1 min.  The Batch report usually takes about 3 to 4 mins to complete. 

Everyone's tags (5)
4 REPLIES
Hall of Fame Super Gold

Issues with a Credit Card Machine using a VG202

Have you set network-clock correctly on teh PRI gateway ?

New Member

Issues with a Credit Card Machine using a VG202

Can you elaborate on your response? I'm having a similar issue with a VG-224.

Thanks!

Lisa Coody

New Member

Issues with a Credit Card Machine using a VG202

Thank you!

Adding "network-clock-select 1 T1 0/0/0" to the config resolved the issue. No more slips and credit card machine runs smoothly now.

I very much appreciate your assistance.

Hall of Fame Super Gold

Re: Issues with a Credit Card Machine using a VG202

Thank you for the nice rating and good luck!

888
Views
10
Helpful
4
Replies