Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Issues with NM-1v and 2V on 2600

Hi Guys,

I have small lab at home and want to start moving into the Voice and Data world, as I have been in the data work for 10 years now.

I have a NM-1V and NM-2V with FXO cards the problem is I can not see the cards from my 2610 and 2611 routers. I have tried changing the code to 12.1 IP Plus and even Enterprise Plus still no luck. Release notes say I should be all good from 12.0!! but still having issues.

Anything Im doing wrong ?? Any other advice to help me on my way ??

Thanks Warren.

1 REPLY
Silver

Re: Issues with NM-1v and 2V on 2600

Ensure that the Cisco IOS Software image has the IOS Plus feature set. This is indicated in the image name by -is (for IP Plus) or -js (for Enterprise Plus). If the feature set is not present, either the voice hardware will not be recognized, voice features will not be available in the Cisco IOS parser, or both.

Try:

http://www.cisco.com/en/US/tech/tk652/tk653/technologies_tech_note09186a0080094fac.shtml

http://www.cisco.com/en/US/products/hw/routers/ps274/products_tech_note09186a00800b53c7.shtml

123
Views
0
Helpful
1
Replies
CreatePlease to create content