Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

IVR "answering" on all voice ports

Hello,

We've a Cisco 1760-V with CCME. The router has one two-BRI card (2 interfaces total BRI2/0 and BRI2/1).

We have also a IVR script, and I want that only the calls directed on the BRI2/0 are sent to the script.

If I apply the script to the dial peer associated to the voice card 0 like this:

!

dial-peer voice 1 pots

application script1

destination-pattern 0T

direct-inward-dial

port 2/0

!

then the calls directed to the BRI2/0 interface are correctly redirected to the script.

But, if I define another dial-peer associated to the other voice port like this:

!

dial-peer voice 2 pots

destination-pattern 0T

port 2/1

!

the calls directed to the BRI2/1 are also directed to the it!

Someone can tell me where is the mistake?

Thanks a lot.

1 REPLY
Bronze

Re: IVR "answering" on all voice ports

These URLs should help you:

Cisco CallManager Compatibility Matrix :

http://www.cisco.com/univercd/cc/td/doc/product/voice/c_callmg/ccmcomp.htm

Cisco IPCC Express Support Checklist :

http://www.cisco.com/warp/public/78/IPCCExpSpt-Cklist.html

92
Views
0
Helpful
1
Replies