If you are monitoring all call and terminal events for all phones via JTAPI, does it burden your CUCM since it has to respond to your app about these events -- specially when you have more than a thousand phone. Are there some guidelines about JTAPI performance and limits -- i.e maximum number of phones/JTAPI client, etc.
Do you have the CTI Manager service running on the server you're attempting to make a JTAPI Provider?
In CRS 4.x and later, it should create the JTAPI and RM JTAPI users, but it may prompt for CCM 'administrator' credentials to add the users. If you have MLA enabled, this really means the 'ccmadministrator' user or a user with similar privileges.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...