04-25-2006 12:26 PM - edited 03-15-2019 04:19 AM
Where can I find the latest version of the 7960 firmware, and where can I find the instructions on how to load it?
Solved! Go to Solution.
04-25-2006 12:40 PM
Hi Jeffrey,
The latest 7960 firmware is 8.0(1).Note that there is a readme file, along with the firmware to download, that will hopefully answer your questions:
The firmware image within the 8.0(1) install program is named P00308000100, and supports the Skinny Client Control Protocol (SCCP) for the following Cisco IP Phone models:
Cisco IP Phone 7940
Cisco IP Phone 7960
This firmware version is supported on Cisco CallManager Release 5.0 and higher, and releases 4.2, 4.1, 4.0, and 3.3.
You will need CCO Login:
http://www.cisco.com/cgi-bin/tablebuild.pl/ip-7900ser
Hope this helps!
Rob
Please remember to rate helpful posts.......
04-25-2006 12:40 PM
Hi Jeffrey,
The latest 7960 firmware is 8.0(1).Note that there is a readme file, along with the firmware to download, that will hopefully answer your questions:
The firmware image within the 8.0(1) install program is named P00308000100, and supports the Skinny Client Control Protocol (SCCP) for the following Cisco IP Phone models:
Cisco IP Phone 7940
Cisco IP Phone 7960
This firmware version is supported on Cisco CallManager Release 5.0 and higher, and releases 4.2, 4.1, 4.0, and 3.3.
You will need CCO Login:
http://www.cisco.com/cgi-bin/tablebuild.pl/ip-7900ser
Hope this helps!
Rob
Please remember to rate helpful posts.......
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: